Tile Installation Questions
Straightforward answers to what homeowners in Sacramento most often ask before starting a tile project.
Materials and Selection
What is the difference between rectified and non-rectified tile?
Rectified tile has been mechanically cut to precise dimensions after firing, so every tile in the batch is within a very tight tolerance — typically within 0.5mm. Non-rectified tile is pressed and fired without that secondary cut, so there is natural size variation between pieces. Rectified tile allows for tighter grout joints (as narrow as 1/16 inch), which gives a more seamless look. Non-rectified tile generally requires wider joints to accommodate the variation. The choice affects both the visual result and the required installation technique.
What makes natural stone tile different to install compared to porcelain?
Natural stone (marble, travertine, slate, limestone) is porous and more fragile during cutting than porcelain. Marble in particular can chip at cut edges and is sensitive to acidic cleaners. The back of stone tile is often uneven, requiring more thinset coverage and back-buttering to achieve a solid bond. Sealing is usually required before grouting to prevent grout from staining the stone face. These factors add time and care to installation compared to dense-body porcelain.
How do I choose a grout color?
Grout color affects how the tile reads in the room. A grout that closely matches the tile color minimizes the visual grid and makes the tile surface feel more continuous — a common choice for large-format tile. Contrasting grout (dark grout with light tile, or vice versa) emphasizes the pattern and individual tile shape. For practical maintenance, mid-tone grouts tend to show wear and staining less than either very light or very dark grout. We can show samples during the estimate to help make this decision concretely.
Installation Process
What is a waterproofing membrane and when is it required?
A waterproofing membrane is a barrier applied to the substrate before tile in wet areas — primarily shower walls, shower floors, and bathtub surrounds. It prevents water that migrates through grout and tile from reaching the underlying structure. Common types include sheet-applied membranes (like Schluter Kerdi) and liquid-applied membranes that are painted on and cure to a flexible film. In Sacramento's older housing stock, we sometimes find that original shower installations were done over standard drywall with no membrane — a significant failure point that becomes apparent during renovation.
How flat does a floor need to be before tile can be installed?
The Tile Council of North America specifies a maximum variation of 1/4 inch over a 10-foot span for standard tile installations, and 1/8 inch over a 10-foot span for tiles with any edge 15 inches or longer. In Sacramento homes with wood subfloor construction — which is common in older neighborhoods like Curtis Park and Land Park — floors often need leveling compound or shimming to meet this spec before large-format tile can be set without lippage or cracking.
What are expansion joints and why do they matter in tile floors?
Expansion joints are deliberate gaps in the tile field, typically filled with flexible caulk rather than grout, that allow the tile assembly to move slightly with temperature and humidity changes. Without them, the tile and grout system has nowhere to accommodate movement, and grout cracks or tiles pop loose over time. In Sacramento's climate — with hot, dry summers and cooler winters — thermal cycling is significant. Expansion joints are placed at perimeters, at changes in plane, and at intervals through large continuous floor areas per TCNA guidelines.
Project Logistics
How long after tile is installed before the area can be used?
Foot traffic on floor tile is generally safe after 24 hours, though 48 hours is more conservative for heavier use. Grouting can happen after 24 hours of thinset cure. Grout needs an additional 24-72 hours before wet exposure, depending on the grout type and ambient temperature. Shower tile should not be used for at least 72 hours after grouting to allow the grout to cure properly before sustained water exposure. Epoxy grout cures faster but is more sensitive to temperature during installation.
How much extra tile should be ordered for a project?
A standard overage of 10% is common for straightforward installations with simple layouts. Diagonal patterns, herringbone, and other complex layouts increase waste from cuts and should be ordered with 15% overage. For natural stone with significant color variation, ordering extra from the same lot is important because stone from different quarry pulls can differ noticeably. We calculate overage as part of the estimate and include it in material recommendations.
Do you supply the tile, or does the homeowner purchase it?
We are flexible on this. Some homeowners prefer to select and purchase their own tile, in which case we provide a spec sheet indicating required quantities, tile thickness tolerances, and any specific requirements for the installation method. Other homeowners prefer that we source the material. We can discuss both approaches during the estimate and recommend suppliers in the Sacramento area that carry the types of tile suited to your project.