Polished Marble Living Room Floor in Land Park
About this project
This living room floor installation in a Land Park home used a high-gloss polished brown marble-look porcelain tile with a decorative white medallion inlay set at the room's visual center. The medallion is a pre-fabricated waterjet-cut inset piece — it arrives as a single unit and is set into a pre-cut opening in the field tile. Getting this right requires planning the entire field tile layout from the medallion outward, so that the field tile joints align symmetrically around the inset piece on all four sides.
Polished porcelain floor tile requires a non-sanded, low-shrinkage grout because the polished surface shows any grout haze or residue more visibly than a matte tile would. The grout cleanup sequence is more careful — the tile surface is cleaned with a damp sponge in stages during the grouting process to prevent haze from curing on the polished face. A sealer is applied to the grout joints after cure to protect against staining in the high-traffic living room area.
What we did
Wood-frame floor in this Land Park home assessed for deflection, decoupling membrane installed throughout
Room layout planned from medallion center outward, field tile dry-laid to confirm symmetry before adhesive
High-gloss polished porcelain field tile set, medallion inset piece set into pre-cut opening with matching mortar
Non-sanded grout applied with careful haze management on polished surface, grout joints sealed after cure
For living room floor tile in Land Park, call (916) 999-5399.